Author Affiliations
Abstract
1 Center for High Pressure Science and Technology Advanced Research, Shanghai 201203, China
2 Key Laboratory of Materials Physics, Institute of Solid State Physics, HFIPS, Chinese Academy of Sciences, Hefei 230031, China
3 University of Science and Technology of China, Hefei 230026, China
4 Shanghai Key Laboratory of Material Frontiers Research in Extreme Environments (MFree), Shanghai Advanced Research in Physical Sciences (SHARPS), Shanghai 201203, China
5 State Key Laboratory of Superhard Materials, Institute of Physics, Jilin University, Changchun 130012, China
The recent report of superconductivity in nitrogen-doped lutetium hydride (Lu-H-N) at 294 K and 1 GPa brought hope for long-sought-after ambient-condition superconductors. However, the failure of scientists worldwide to independently reproduce these results has cast intense skepticism on this exciting claim. In this work, using a reliable experimental protocol, we synthesized Lu-H-N while minimizing extrinsic influences and reproduced the sudden change in resistance near room temperature. With quantitative comparison of the temperature-dependent resistance between Lu-H-N and the pure lutetium before reaction, we were able to clarify that the drastic resistance change is most likely caused by a metal-to-poor-conductor transition rather than by superconductivity. Herein, we also briefly discuss other issues recently raised in relation to the Lu-H-N system.
Matter and Radiation at Extremes
2023, 8(5): 058401
作者单位
摘要
1 上海大学机电工程与自动化学院精密机械工程系,上海 200072
2 上海瑞立柯信息科技有限公司,上海 200233
3 宁波维真显示科技股份有限公司,浙江 宁波 315105
全息技术是实现空间悬浮真三维(3D)显示的重要方法。空间光调制器(SLM)作为当前唯一的实时动态全息真3D图像投射仪器,像素量、分辨率等不足限制了其在空间悬浮真三维显示领域的应用。研究多SLM拼接实现高分辨低噪声的空间悬浮真3D显示,首先通过菲涅耳层析法结合空间坐标变换技术,计算获得3D物体360°视角的高分辨率全息图;然后将每张全息图分为相同分辨率的4幅图,加载到阵列式拼接的4个SLMs上,滤除一阶之外的光束后,再现出完整的具有高信息容量高分辨率的全息3D实像;最后利用超声雾化介质进行承载,实现实时动态空间悬浮真3D显示。另外,利用时间平均法对重建像进行噪声抑制研究,实验结果证明该方法可有效地提升空间悬浮全息显示图像的质量。
全息真三维显示 空间悬浮动态显示 多空间光调制器拼接 超声雾化介质 时间平均法 
激光与光电子学进展
2023, 60(8): 0811021
作者单位
摘要
国网新疆电力有限公司 电力科学研究院, 新疆 乌鲁木齐 830000
高压电缆的温度会严重影响电缆的使用, 通过表皮温度监测线芯内部温度情况, 具有重要的意义。利用光纤光栅温度传感器, 可以实现电缆温度的精确测量, 通过分析其工作原理和解调机制, 证明温度和光纤光栅中心波长具有一定线性关系。通过形状因子改进三芯电缆的标准关系, 实现线芯温度与表皮温度间的方程构建, 并证明其准确性。搭建光纤光栅实时测温系统, 通过标定实验和误差分析, 证明测温系统的有效性。通过实验验证, 证明该测温系统能够有效实现高压电缆的温度测量, 并对于异常状态电缆进行辨别。
光纤光栅 实时测温 高压电缆 优化设计 Fiber Bragg grating real time temperature measurement high voltage cable optimal design 
光学技术
2023, 49(1): 85
Author Affiliations
Abstract
1 Center for High Pressure Science and Technology Advanced Research, Beijing 100094, China
2 High Pressure Collaborative Access Team, Geophysical Laboratory, Carnegie Institution of Washington, Argonne, Illinois 60439, USA
3 Center for the Study of Matter at Extreme Conditions and Department of Mechanical and Materials Engineering, Florida International University, Miami, Florida 33199, USA
4 Advanced Photon Source, Argonne National Laboratory, Lemont, Illinois 60439, USA
5 HPCAT, X-Ray Science Division, Argonne National Laboratory, Lemont, Illinois 60439, USA
6 MAX IV Laboratory, Lund University, 22100 Lund, Sweden
7 Condensed Matter Theory Group, Materials Theory Division, Department of Physics and Astronomy, Uppsala University, Uppsala S-75120, Sweden
8 Center for Advanced Radiation Sources, University of Chicago, Chicago, Illinois 60637, USA
9 Department of Engineering Sciences and Mathematics, Luleå University of Technology, 97187 Luleå, Sweden
Diamond anvil cell techniques have been improved to allow access to the multimegabar ultrahigh-pressure region for exploring novel phenomena in condensed matter. However, the only way to determine crystal structures of materials above 100 GPa, namely, X-ray diffraction (XRD), especially for low Z materials, remains nontrivial in the ultrahigh-pressure region, even with the availability of brilliant synchrotron X-ray sources. In this work, we perform a systematic study, choosing hydrogen (the lowest X-ray scatterer) as the subject, to understand how to better perform XRD measurements of low Z materials at multimegabar pressures. The techniques that we have developed have been proved to be effective in measuring the crystal structure of solid hydrogen up to 254 GPa at room temperature [C. Ji et al., Nature 573, 558–562 (2019)]. We present our discoveries and experiences with regard to several aspects of this work, namely, diamond anvil selection, sample configuration for ultrahigh-pressure XRD studies, XRD diagnostics for low Z materials, and related issues in data interpretation and pressure calibration. We believe that these methods can be readily extended to other low Z materials and can pave the way for studying the crystal structure of hydrogen at higher pressures, eventually testing structural models of metallic hydrogen.
Matter and Radiation at Extremes
2020, 5(3): 038401
作者单位
摘要
国网江西省电力有限公司经济技术研究院, 江西南昌 330043
随着通信技术与通信方式的快速发展, 通信信号调制方式与通信系统越来越复杂。复杂通信信号连续相位频移键控 (CPFSK)由于其频谱利用率高, 大量用于卫星通信等领域。针对复杂信号 CPFSK的参数估计问题, 提出一种基于李雅普诺夫指数的 CPFSK信号调制指数估计方法。通过 CPFSK信号李雅普诺夫指数与调制指数的数学关系模型, 提取李雅普诺夫指数估计信号调制指数。仿真验证了算法性能, 得到 CPFSK调制指数估计均方根误差随信噪比的变化曲线。此方法计算复杂度低且实现简单, 适用于 CPFSK信号与常规频移键控 (FSK)信号的调制指数估计。
连续相位频移键控 李雅普诺夫指数 调制指数估计 信号分析 Continuous-Phase Frequency Shift Keying Lyapunov exponent modulation indexestimation signal analysis 
太赫兹科学与电子信息学报
2018, 16(3): 400
作者单位
摘要
西北核技术研究所, 陕西 西安 710024
为研究光纤探针应用于炸药爆速测试的可行性及其在冲击作用下的响应特性,开展了梯黑铝(THL)炸药和混合B炸药爆轰实验、冲击作用下光纤响应实验.分别采用直径Φ0.063 5 mm、前端带聚光准直凸透镜的玻璃光纤探针和直径Φ1 mm、前端不带聚光准直凸透镜的塑料光纤探针,测定爆轰过程化学反应阵面传播速度.结果表明:两者都能够准确测定约7 000 m/s的炸药爆轰速度,测量不确定度≤2%.另外,采用直径Φ1 mm、前端不带聚光准直凸透镜的塑料光纤探针,记录强冲击波作用下光纤响应信号,验证了强冲击产生的高压高温作用下的“黑体辐射”现象.因此,光纤探针能够准确测定炸药爆轰速度,且在冲击作用下出现“色温”现象,即黑体“辐射现象”.
光纤探针 爆速 炸药 fiber probe detonation velocity explosive 
应用光学
2015, 36(2): 327
作者单位
摘要
吉林大学 原子与分子物理研究所, 长春 130012
实验通过二极管记录透射光信号随脉冲个数变化关系以及观测样品烧蚀形貌来研究不同实验条件对激光烧蚀的影响。使用的样品是厚度为50 μm铝箔。实验中通过研究不同变量:激光焦点与样品的相对位置、激光的能量、背景气体压强以及脉冲形状对烧蚀加工过程和结果的影响,从而获得较好烧蚀效果的条件,达到控制烧蚀加工过程的目的。特别是通过使用不同形状的脉冲和具有一定规律的脉冲序列对样品进行烧蚀,发现某些形状的整形脉冲烧蚀结果明显优于变换极限脉冲。说明脉冲整形作为一种新的技术可以在激光精细钻孔领域得到更深入的研究和应用。
整形脉冲 烧蚀 激光能量 气体压强 激光焦点位置 shaped pulse ablation laser energy ambient pressure focus position 
强激光与粒子束
2012, 24(10): 2381
赵丹莹 1,2生吉萍 1,3,*丁洋 1申琳 1[ ... ]刘灿 1
作者单位
摘要
1 中国农业大学食品科学与营养工程学院, 北京100083
2 北京市西城区疾病预防控制中心, 北京100011
3 中国农业科学院农产品加工研究所, 北京100931
超微弱发光测定法可快速、 灵敏地反映生物体在逆境下的生理状态, 已开始得到广泛应用, 但有关其在采后园艺产品冷害发生监测中的应用尚未见报道。 文章通过分析番茄果实在不同冷害状态下的超微弱发光规律, 及其与冷害程度间的关系, 探讨超微弱发光测定法在监测采后番茄果实冷害中应用的可能性。 结果表明, 果实超微弱发光强度随冷害程度的提高而上升, 且在表现冷害症状前, 冷害果实的超微弱发光值已显著高于正常果实(P<0.01)。 不同冷害程度下果实的冷害发病率、 冷害指数分别与超微弱发光值的相关系数达到0.901 6和0.957 7(P<0.01), 证明超微弱发光可以准确反映番茄果实冷害程度。
超微弱发光 冷害 逆境 检测 番茄 果实 Ultraweak luminescence Cold injury Stress Detection Tomato Fruit 
光谱学与光谱分析
2010, 30(9): 2493

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!